【08-02】HPY计算机维护系统CD/UD，64/32位W8PE+03PE/NV+DOS，高端隐藏、UEFI&PXE

2011bjham

老师，有这么一种情况，我用的是U+的方式写入，有一台机子在启动2003PE的时候好像提示找不到什么2003.is_这类的提示，07PE也是这样。但在其它机子正常。请问这是主板不支持还是要在BIOS设置。菜单这些都能显示的。

PS:原来是内存条问题，内存条上面有灰尘，导致机器只认到1900K内存。晕。所以启动不了。

[ 本帖最后由 2011bjham 于 2011-7-3 11:15 编辑 ]

2011s0me

楼主，这个PE 用在AMD 主板上 量产后不能启动WIN7PE
不知道什么问题

hpy7332

原帖由 2011s0me 于 2011-7-2 15:35 发表
楼主，这个PE 用在AMD 主板上 量产后不能启动WIN7PE
不知道什么问题

你是用全内置ISO版合盘_V7.32量产的，在AMD主板上能启动主菜单，但不能启动WIN7PE。
那么03PE及DOS菜单里的IMG能否启动？W7PE启动时有没有什么错误提示，还是在进度条上卡住了？

19870720

好了.已经以下载了...

2011leiyin9961

你好大侠  本人是新手 一直梦寐以求PXE启动PE等维护工具  看见您的作品十分感谢  但是遇到些问题 麻烦您帮小弟指点下

下载了您的文件 解压出来  直接运行SETTFTP.CMD   还需要有其他操作吗？ 如果需要帮忙指点下

在联想笔记本上做测试  笔记本有些老 联想昭阳E420A上做PXE启动测试  错误如下
启动WIN7PE 报错
Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"


启动03PE 报错
error 13: invalid or unsupported executable format!



tftp 日志

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:02:3F:B9:40:6B [03/07 09:43:10.531]
DHCP: proposed address 192.168.1.101 [03/07 09:43:12.046]
4784 Request 2 not processed [03/07 09:43:12.109]
4784 Request 2 not processed [03/07 09:43:12.171]
4784 Request 2 not processed [03/07 09:43:12.218]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:02:3F:B9:40:6B [03/07 09:43:12.609]
Previously allocated address 192.168.1.101 acked [03/07 09:43:14.109]
Connection received from 192.168.1.101 on port 2070 [03/07 09:43:14.156]
Read request for file <grldr>. Mode octet [03/07 09:43:14.156]
OACK: <tsize=255412,> [03/07 09:43:14.156]
Using local port 4339 [03/07 09:43:14.156]
4784 Request 2 not processed [03/07 09:43:14.171]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:14.234]
Connection received from 192.168.1.101 on port 2071 [03/07 09:43:14.234]
Read request for file <grldr>. Mode octet [03/07 09:43:14.234]
Using local port 4340 [03/07 09:43:14.234]
4784 Request 2 not processed [03/07 09:43:14.281]
4784 Request 2 not processed [03/07 09:43:14.437]
<grldr>: sent 499 blks, 255412 bytes in 0 s. 0 blk resent [03/07 09:43:14.484]
Connection received from 192.168.1.101 on port 2072 [03/07 09:43:14.968]
Read request for file </grldr>. Mode octet [03/07 09:43:14.968]
OACK: <tsize=255412,> [03/07 09:43:14.968]
Using local port 4341 [03/07 09:43:14.968]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:15.015]
Connection received from 192.168.1.101 on port 2073 [03/07 09:43:15.046]
Read request for file </grldr>. Mode octet [03/07 09:43:15.046]
Using local port 4342 [03/07 09:43:15.046]
Connection received from 192.168.1.101 on port 2074 [03/07 09:43:15.187]
Read request for file </menu.lst>. Mode octet [03/07 09:43:15.187]
File <\menu.lst> : error 2 in system call CreateFile 系统找不到指定的文件。 [03/07 09:43:15.187]
Connection received from 192.168.1.101 on port 2075 [03/07 09:43:15.296]
Read request for file </menu.lst/01-00-02-3F-B9-40-6B>. Mode octet [03/07 09:43:15.296]
File <\menu.lst\01-00-02-3F-B9-40-6B> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.296]
Connection received from 192.168.1.101 on port 2076 [03/07 09:43:15.406]
Read request for file </menu.lst/C0A80165>. Mode octet [03/07 09:43:15.406]
File <\menu.lst\C0A80165> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.406]
Connection received from 192.168.1.101 on port 2077 [03/07 09:43:15.515]
Read request for file </menu.lst/C0A8016>. Mode octet [03/07 09:43:15.515]
File <\menu.lst\C0A8016> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.515]
Connection received from 192.168.1.101 on port 2078 [03/07 09:43:15.625]
Read request for file </menu.lst/C0A801>. Mode octet [03/07 09:43:15.625]
File <\menu.lst\C0A801> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.625]
Connection received from 192.168.1.101 on port 2079 [03/07 09:43:15.734]
Read request for file </menu.lst/C0A80>. Mode octet [03/07 09:43:15.734]
File <\menu.lst\C0A80> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.734]
Connection received from 192.168.1.101 on port 2080 [03/07 09:43:15.843]
Read request for file </menu.lst/C0A8>. Mode octet [03/07 09:43:15.843]
File <\menu.lst\C0A8> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.843]
Connection received from 192.168.1.101 on port 2081 [03/07 09:43:15.953]
Read request for file </menu.lst/C0A>. Mode octet [03/07 09:43:15.953]
File <\menu.lst\C0A> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:15.953]
Connection received from 192.168.1.101 on port 2082 [03/07 09:43:16.062]
Read request for file </menu.lst/C0>. Mode octet [03/07 09:43:16.062]
File <\menu.lst\C0> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:16.062]
Connection received from 192.168.1.101 on port 2083 [03/07 09:43:16.171]
Read request for file </menu.lst/C>. Mode octet [03/07 09:43:16.171]
File <\menu.lst\C> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:16.171]
Connection received from 192.168.1.101 on port 2084 [03/07 09:43:16.296]
Read request for file </menu.lst/default>. Mode octet [03/07 09:43:16.296]
File <\menu.lst\default> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:16.296]
Connection received from 192.168.1.101 on port 2085 [03/07 09:43:17.734]
Read request for file </menu.lst>. Mode octet [03/07 09:43:17.734]
File <\menu.lst> : error 2 in system call CreateFile 系统找不到指定的文件。 [03/07 09:43:17.734]
Connection received from 192.168.1.101 on port 2086 [03/07 09:43:17.828]
Read request for file </MENU.LST>. Mode octet [03/07 09:43:17.828]
File <\MENU.LST> : error 2 in system call CreateFile 系统找不到指定的文件。 [03/07 09:43:17.828]
Connection received from 192.168.1.101 on port 2087 [03/07 09:43:17.937]
Read request for file </boot/grub/menu.lst>. Mode octet [03/07 09:43:17.937]
OACK: <tsize=1722,> [03/07 09:43:17.937]
Using local port 4356 [03/07 09:43:17.937]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:18.000]
Connection received from 192.168.1.101 on port 2088 [03/07 09:43:18.046]
Read request for file </boot/grub/menu.lst>. Mode octet [03/07 09:43:18.046]
Using local port 4357 [03/07 09:43:18.046]
Connection received from 192.168.1.101 on port 2089 [03/07 09:43:18.125]
Read request for file </boot/grub/default>. Mode octet [03/07 09:43:18.125]
File <\boot\grub\default> : error 2 in system call CreateFile 系统找不到指定的文件。 [03/07 09:43:18.125]
Connection received from 192.168.1.101 on port 2090 [03/07 09:43:18.234]
Read request for file </boot/grub/menu.lst>. Mode octet [03/07 09:43:18.234]
OACK: <tsize=1722,> [03/07 09:43:18.234]
Using local port 4359 [03/07 09:43:18.234]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:18.281]
Connection received from 192.168.1.101 on port 2091 [03/07 09:43:18.312]
Read request for file </boot/grub/menu.lst>. Mode octet [03/07 09:43:18.312]
Using local port 4360 [03/07 09:43:18.312]
<\boot\grub\menu.lst>: sent 4 blks, 1722 bytes in 0 s. 0 blk resent [03/07 09:43:18.390]
Connection received from 192.168.1.101 on port 2092 [03/07 09:43:18.421]
Read request for file </BOOT/GRUB/MESSAGE>. Mode octet [03/07 09:43:18.421]
OACK: <tsize=679936,> [03/07 09:43:18.421]
Using local port 4361 [03/07 09:43:18.421]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:18.484]
Connection received from 192.168.1.101 on port 2093 [03/07 09:43:18.531]
Read request for file </BOOT/GRUB/MESSAGE>. Mode octet [03/07 09:43:18.531]
Using local port 4362 [03/07 09:43:18.531]
Connection received from 192.168.1.101 on port 2094 [03/07 09:43:18.640]
Read request for file </BOOT/GRUB/MESSAGE>. Mode octet [03/07 09:43:18.640]
OACK: <tsize=679936,> [03/07 09:43:18.640]
Using local port 4363 [03/07 09:43:18.640]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:18.703]
Connection received from 192.168.1.101 on port 2095 [03/07 09:43:18.734]
Read request for file </BOOT/GRUB/MESSAGE>. Mode octet [03/07 09:43:18.734]
Using local port 4364 [03/07 09:43:18.734]
Connection received from 192.168.1.101 on port 2096 [03/07 09:43:22.546]
Read request for file </BOOT/PXEMGR.0>. Mode octet [03/07 09:43:22.546]
OACK: <tsize=25068,> [03/07 09:43:22.546]
Using local port 4368 [03/07 09:43:22.546]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:22.593]
Connection received from 192.168.1.101 on port 2097 [03/07 09:43:22.625]
Read request for file </BOOT/PXEMGR.0>. Mode octet [03/07 09:43:22.625]
Using local port 4369 [03/07 09:43:22.625]
Connection received from 192.168.1.101 on port 2098 [03/07 09:43:22.765]
Read request for file </BOOT/PXEMGR.0>. Mode octet [03/07 09:43:22.765]
OACK: <tsize=25068,> [03/07 09:43:22.765]
Using local port 4370 [03/07 09:43:22.765]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:22.812]
Connection received from 192.168.1.101 on port 2099 [03/07 09:43:22.843]
Read request for file </BOOT/PXEMGR.0>. Mode octet [03/07 09:43:22.843]
Using local port 4371 [03/07 09:43:22.843]
<\BOOT\PXEMGR.0>: sent 49 blks, 25068 bytes in 0 s. 0 blk resent [03/07 09:43:22.921]
Connection received from 192.168.1.101 on port 2100 [03/07 09:43:22.953]
Read request for file <BOOT\bootmgr.exe.>. Mode octet [03/07 09:43:22.953]
Using local port 4372 [03/07 09:43:22.953]
<BOOT\bootmgr.exe.>: sent 1023 blks, 523328 bytes in 1 s. 0 blk resent [03/07 09:43:23.234]
Connection received from 192.168.1.101 on port 16704 [03/07 09:43:23.781]
Read request for file <\Boot\Fonts\wgl4_boot.ttf>. Mode octet [03/07 09:43:23.781]
File <\Boot\Fonts\wgl4_boot.ttf> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:23.781]
Connection received from 192.168.1.101 on port 16705 [03/07 09:43:23.843]
Read request for file <\boot.ini>. Mode octet [03/07 09:43:23.843]
File <\boot.ini> : error 2 in system call CreateFile 系统找不到指定的文件。 [03/07 09:43:23.843]
TIMEOUT waiting for Ack block #2  [03/07 09:43:30.125]
TIMEOUT waiting for Ack block #2  [03/07 09:43:33.093]
TIMEOUT waiting for Ack block #2  [03/07 09:43:33.593]
WARNING : Last block #1329 not acked for file <\BOOT\GRUB\MESSAGE> [03/07 09:43:34.078]
<\BOOT\GRUB\MESSAGE>: sent 1328 blks, 679936 bytes in 16 s. 6 blks resent [03/07 09:43:34.078]
TIMEOUT waiting for Ack block #5  [03/07 09:43:37.703]
Connection received from 192.168.1.101 on port 16706 [03/07 09:43:39.687]
Read request for file <\Boot\BCD>. Mode octet [03/07 09:43:39.687]
OACK: <tsize=262144,> [03/07 09:43:39.687]
Using local port 4376 [03/07 09:43:39.687]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [03/07 09:43:39.734]
Connection received from 192.168.1.101 on port 16707 [03/07 09:43:39.734]
Read request for file <\Boot\BCD>. Mode octet [03/07 09:43:39.734]
OACK: <tsize=262144,> [03/07 09:43:39.734]
Using local port 4377 [03/07 09:43:39.734]
Peer returns ERROR <> -> aborting transfer [03/07 09:43:39.843]
Connection received from 192.168.1.101 on port 16708 [03/07 09:43:39.859]
Read request for file <\Boot\Fonts\wgl4_boot.ttf>. Mode octet [03/07 09:43:39.859]
File <\Boot\Fonts\wgl4_boot.ttf> : error 3 in system call CreateFile 系统找不到指定的路径。 [03/07 09:43:39.859]

[ 本帖最后由 2011leiyin9961 于 2011-7-3 09:46 编辑 ]

2011yy8553

老先生，您好！PE加载时候的右键头的进度条怎样加进去，没有进度表显示等待时候心里没有底，不知道怎么加，能否解答

srxljl

谢谢楼主，先看看了，呵呵呵呵

hpy7332

原帖由 2011leiyin9961 于 2011-7-3 09:03 发表
你好大侠  本人是新手 一直梦寐以求PXE启动PE等维护工具  看见您的作品十分感谢  但是遇到些问题 麻烦您帮小弟指点下

下载了您的文件 解压出来  直接运行SETTFTP.CMD   还需要有其他操作吗？ 如果需要帮忙指 ...

用本机虚拟光驱加载下载的HPY全内置ISO版合盘_V7.32.ISO，运行SETTFTP.CMD，即可对客户机进行PXE启动：WIN7PE和全部DOS程序。
提取或解开ISO到硬盘或U盘，运行SETTFTP.CMD，同样可以实现PXE启动。需注意grldr所在目录应为当前目录，客户机应是同一网段的实机。

虚拟机去年用VM6.5时，网络桥接，用以上方法测试，PXE启动都能获得成功，现在用VM7.0不知为什么总是不成功，菜单也出不来，真不知该怎么设置。

2011s0me

原帖由 hpy7332 于 2011-7-2 21:15 发表

你是用全内置ISO版合盘_V7.32量产的，在AMD主板上能启动主菜单，但不能启动WIN7PE。
那么03PE及DOS菜单里的IMG能否启动？W7PE启动时有没有什么错误提示，还是在进度条上卡住了？

03pe 和 W7PE 都卡住了，很慢  然后蓝屏了

2011cricket

老先生 "先USB2在启动PE03" 如果要量产使用 应该改些什么呢

title 【 5 】先USB2再启动PE03 (老机U+)
map --mem /BOOT/IMGS/USB2.IMA (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)

hpy7332

原帖由 2011cricket 于 2011-7-3 15:07 发表
老先生 "先USB2在启动PE03" 如果要量产使用 应该改些什么呢

title 【 5 】先USB2再启动PE03 (老机U+)
map --mem /BOOT/IMGS/USB2.IMA (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)

此功能仅对于七、八年前，如845等主板效果明显，那时启动1个20多兆的PE内核要7到10分钟，用此功能后2分多就进桌面了。但其后的主板就没啥用了，弄的不好反而会卡住。

如果你是这类主板，想量产启动，可试试P大的U盘自动加速器，不过用于量产效果如何你自己对比一下吧。

qqqyl

支持你没商量  感谢

2011fengye

为什么我看不到呢，难道是分数不够？

2011yyjs

顶贴，感谢楼主，楼主行库了

2011bjham

老师，怎样在WINPE03.INI文件里面取消载入墙纸？就是让03和7默认无墙纸。

lunlun2000

怎样添加ISO.LST文件内容，为甚么我这个版本添加不成功，在2011的版本可以啊，是不是这版本问题啊

alakee

原帖由  lunlun2000 于 2011-7-5 00:58 发表
怎样添加ISO.LST文件内容，为甚么我这个版本添加不成功，在2011的版本可以啊，是不是这版本问题啊

我也有同样的问题，不但 ISO.LST 不行， IMG.LST 也不行，我试过了，5月1日的版本还可以。
ISO版是这样， UD 版没有进行测试。记得好像是可以的。

[ 本帖最后由 alakee 于 2011-7-5 08:48 编辑 ]

2011s0me

支持老师发个 ISO 转UD 的教程 或者直接发个UD版本的

hpy7332

原帖由 alakee 于 2011-7-5 08:45 发表

我也有同样的问题，不但 ISO.LST 不行， IMG.LST 也不行，我试过了，5月1日的版本还可以。
ISO版是这样， UD 版没有进行测试。记得好像是可以的。

ISO.LST和IMG.LST菜单修改
http://bbs.wuyou.net/forum.php?mod=viewthread&tid=178541&page=124#pid2225914   (#1239)

[ 本帖最后由 hpy7332 于 2011-7-6 18:03 编辑 ]

n225

不知道有没有无线功能

hpy7332

2011年7月6日 版本V7.35
1、03PE内核改用WIM，浏览器改用IE6，除W7PE可完全网启外，03PE也可快速PXE启动，并加载声网卡，IE6，GHOST32和全拼输入法等程序。WIM可用GIMAGEX或WIMTOOL打包（我是用WIMTOOL打包的），WIM的压缩率低于IS_。

2、更新grldr到0628，更新DOS版MEMTEST到4.2，HDDREG到2011。另PE外置增加NT6快捷安装器（兔子作品），宽带密码查看，局域网查看，局域网共享设置和MAXNGS网克等一些实用工具。

HPY外置分离全藏入UD版合盘_V7.35.fba 也将于近日发布。

[ 本帖最后由 hpy7332 于 2011-7-6 20:37 编辑 ]

snbxeon

谢谢老先生更新作品，收下啦。

asan222

下载中，期待UD版合盘版

ksafei

一直用老先生的作品，先收藏新内核版，并期待UD版。

lunlun2000

已经照着改也没效啊，都是启动不到ISO 菜单，可以吧ISO菜单做好发上来吗？老大。

beitter

HPY大大更新了，支持，感谢！！

下载使用、收藏中！

2011yy8553

老先生又更新了，下载收藏了

ttt0001

一直固定用老先生的作品，谢谢！

2011s0me

老师，一直从7.26用过来的 ，期待UD版

2011spznlau

什么时候更新UD版啊