在BAT中加入启用VBE的中文支持的语句会出现死循环（17楼问题） - 无忧启动论坛

!BAT
checkrange 0x21 read 0x8280 && if not "%menuflpe:~-4%"==".flp" pxe detect
checkrange 524:-1 calc *0x413 & 0xffff || map --int15nolow=1 && pause Warnning: less memory
if exist ()/boot/grub/init.flp command ()/boot/grub/init.flp
if not exist ()/boot/grub/menu.flp call :errclpB
:errclpB
find --set-root /boot/grub/init.flp && configfile ()/boot/grub/init.flp init ! goto :errclpA
:errclpA
find --set-root /SXHPE.ISO || find --set-root /boot/SXHPE.ISO || goto :errclp2
echo Loading SXHPE.ISO...
map /SXHPE.ISO (0xB5) || map /boot/SXHPE.ISO (0xB5) || map --mem /boot/SXHPE.ISO (0xB5) || map --mem /SXHPE.ISO (0xB5)
map --hook
write 0x60003 1
chainloader (0xB5)/grldr
root (0xB5)
boot
:errclp2
echo Menu file not found!
pause
commandline

复制代码

!BAT
terminal console
echo
debug off
checkrange 20120201:-1 read 0x8278 || pause Err.Version!!! && reboot
checkrange 1 read 0x60000 && goto :showmenu ! write 0x60000 1
set menuflpe=
call Fn.0 0 0x8217 | set /u menuflpe=
checkrange 0x21 read 0x8280 && if not "%menuflpe:~-4%"==".flp" pxe detect NotExist
checkrange 524:-1 calc *0x413 & 0xffff || map --int15nolow=1 && pause Warnning: less memory
write 0x60001 0
::PXE
write 0x60002 0
::不加速
write 0x60003 0
::整体ISO标志
write 0x60005 0
::加速器已运行过标志
write 0x60004 0
::debug状态标志
write 0x60006 0
::图形模式标志
debug 1
checkrange 0x21 read 0x8280 && call :pxe
set rootdev=%@root%
root %rootdev%
set PEISO=/SXHPE.ISO
goto :menu
:ztiso
echo Loading SXHPE.ISO......
if "#%1"=="#memmap" map --mem /SXHPE.ISO (0xB5) && map --hook && chainloader (0xB5)/grldr && root (0xB5) && write 0x60003 1 && boot
map /SXHPE.ISO (0xB5) || map /boot/SXHPE.ISO (0xB5) || map --mem /boot/SXHPE.ISO
map --hook
chainloader (0xB5) && write 0x60003 1 && boot
chainloader (0xB5)/grldr && write 0x60003 1 && boot
:pxe
if #%1=#qx pxe detect
if /i "%menuflpe%"=="grldr" pxe detect
if /i not "%menuflpe:~-4%"==".flp" pxe detect NotExist
if /i "%menuflpe:~-4%"==".flp" pxe detect
write 0x60001 1
write 0x60002 1
pxe
:menu
set krnl=
if exist (bd)/MKRL/NVPEXP.LZMA rootnoverify (bd) && set krnl=(bd)/MKRL/NVPEXP.LZMA && goto :showmenu
if exist (bd)/MKRL/NVPE2K3.LZMA rootnoverify (bd) && set krnl=(bd)/MKRL/NVPE2K3.LZMA && goto :showmenu
if exist (bd)%PEISO% && rootnoverify (bd) && goto :ztiso
if exist (bd)/boot/SXHPE.ISO set PEISO=/boot/SXHPE.ISO && rootnoverify (bd) && goto :ztiso
::有时候可能启动设备与当前根驱动器不一致，可能当前驱动器上存在这几个玩意，照上面三句执行
if exist /MKRL/NVPEXP.LZMA set krnl=/MKRL/NVPEXP.LZMA && goto :showmenu
if exist /MKRL/NVPE2K3.LZMA set krnl=/MKRL/NVPE2K3.LZMA && goto :showmenu
if exist %PEISO% goto :ztiso
if exist /boot/SXHPE.ISO set PEISO=/boot/SXHPE.ISO && goto :ztiso
::也许会有放到(hd0)/的情况，包括经过各种转换交换映射过来的情况（这个不清楚什么时候遇到的）
if exist (hd0)/MKRL/NVPEXP.LZMA rootnoverify (hd0) && set krnl=(hd0)/MKRL/NVPEXP.LZMA && goto :showmenu
if exist (hd0)/MKRL/NVPE2K3.LZMA rootnoverify (hd0) && set krnl=(hd0)/MKRL/NVPE2K3.LZMA && goto :showmenu
if exist (hd0)%PEISO% && rootnoverify (hd0) && goto :ztiso
if exist (hd0)/boot/SXHPE.ISO set PEISO=(hd0)/boot/SXHPE.ISO && goto :ztiso
::上面三种情况都没有，全盘搜索
find --set-root /MKRL/NVPEXP.LZMA && set krnl=/MKRL/NVPEXP.LZMA && goto :showmenu
find --set-root /MKRL/NVPE2K3.LZMA && set krnl=/MKRL/NVPE2K3.LZMA && goto :showmenu
find --set-root %PEISO% && goto :ztiso
find --set-root /boot/SXHPE.ISO && set PEISO=/boot/SXHPE.ISO && goto :ztiso
::再不行去pd碰碰运气
::强行初始化PD
call :pxe qx
if exist (pd)/MKRL/NVPEXP.LZMA rootnoverify (pd) && set krnl=(pd)/MKRL/NVPEXP.LZMA && goto :showmenu
if exist (pd)/MKRL/NVPE2K3.LZMA rootnoverify (pd) && set krnl=(pd)/MKRL/NVPE2K3.LZMA && goto :showmenu
if exist (pd)%PEISO% rootnoverify (pd) && goto :ztiso
if exist (pd)/boot/SXHPE.ISO set PEISO=(pd)/boot/SXHPE.ISO && goto :ztiso
::最后什么也没找着，报错退出
pause You put the kernel deployed to where to go? && exit 1
:showmenu
set keyt=9999
echo By:
echo Esc to enter command line
echo Space immediately load the root directory of the SXHPE.iso (built into the memory)
pause --wait=3 Wait for you three seconds, the button: && set /A keyt=*0x4CB00
if /i "#%keyt%"=="#9999" commandline
if /i "%keyt%"=="0x20" call :ztiso memmap
configfile /BOOT/GRUB/menu.flp

复制代码

debug 1
terminal console
map --mem ()/boot/grub/res.lzma (0x5)
map --hook
checkrange 1 read 0x60005 || command (0x5)/usb_acc.0pe && write 0x60004 1
graphicsmode -1 100:1024 100:1024 24:32
outline on
color normal=0x0E highlight=0x0C helptext=0x0A heading=0x0C standard=0x0A border=0xE0
splashimage (0x5)/background.bmp
font (0x5)/unifont.hex
#如果合并，在上面这句会跳到开头
title ================================风铃PE V1.1.3 2012-4-24 By czmxbb52================================
clear
iftitle [if exist /MKRL/NVPEXP.LZMA] [1] 启动XPPE [1] Start XPPE
terminal console
debug 1
root %@root%
command (0x5)/F6IMG (0x5)/SRS
command (0x5)/movehd
echo Loading the file, please wait ... (may take a few minutes)
map --mem ()/MKRL/NVPEXP.LZMA (hd0)
map --mem ()/boot/TinyTools.LZMA (0xCE)
map --hook
map --unmap=0x5
map --rehook
echo Finished loading!
chainloader (hd0,0)/ldrpe
root (hd0,0)
boot
iftitle [if exist /MKRL/NVPEXP.LZMA] [2] 启动2K3PE [2] Start 2K3PE\n该版可能被裁掉了
terminal console
root %@root%
command /boot/grub/F6IMG /boot/grub/SRS
command (0x5)/movehd
echo Loading the file, please wait ... (may take a few minutes)
map --mem ()/MKRL/NVPE2K3.LZMA (hd0)
map --mem ()/boot/TinyTools.LZMA (0xCE)
map --hook
map --unmap=0x5
map --rehook
echo Finished loading!
chainloader (hd0,0)/ldrpe
root (hd0,0)
boot
iftitle [if exist /MKRL/Win7PE.WIM] [3] 启动Win7PE（实用维护型）
chainloader ()/boot/7peldr
root ()
boot
iftitle [if exist /puppy/initrd.img] [4] 启动 Puppy Linux
root (bd)
kernel ()/puppy/vmlinuz pmedia=cd pfix=noram
initrd ()/puppy/initrd.img
checkrange 1 read 0x60001 && pxe unload
title [5] 加载F6IMG后串接启动任意分区下的/PE.ISO\n[5] load F6IMG cascading start any partition /PE.ISO
command (0x5)/F6IMG (0x5)/SRS
debug 1
find --set-root /PE.ISO
map /PE.ISO (0xA8) || map --mem /PE.ISO (0xA8)
if not exist (fd1)/TXTSETUP.OEM map --mem (0x5)/DiskImg/WVBlock.IMG (fd1)
map --hook
map --unmap=0x5
map --rehook
chainloader (0xA8)
rootnoverify (0xA8)
boot
title [6] 交换(hd0)(hd1) [6] swap (hd0) (hd1)
map (hd0) (hd1)
map (hd1) (hd0)
map --rehook
kernel || pause OK!
iftitle [if exist /boot/IMGS/KONBOOT.GZ] [7] KonBoot免口令模块（请细看下面提示）\n[7] KonBoot password-free modules (which may need to swap the disk)\n传奇的绕过电脑启动密码的工具。可能需要交换磁盘，然后工作完了会回到此菜单。请选择从硬盘启动就OK！
map --mem ()/boot/IMGS/KONBOOT.GZ (fd0)
map --hook
map --unmap=0x5
map --rehook
chainloader (fd0)+1
rootnoverify (fd0)
boot
iftitle [if exist /boot/IMGS/maxdos.gz] [8] 启动MaxDOS工具箱 [8] Start MaxDOS Toolbox
map --mem ()/boot/IMGS/maxdos.gz (fd0)
map --hook
map --unmap=0x5
map --rehook
chainloader (fd0)/io.sys
rootnoverify (fd0)
boot
title [9] 扫描/BOOT/IMGS目录下的镜像文件并列出\n[9] to start the RUN module and scanning /BOOT/IMGS directory, the image file and listed
terminal console
command RUN /BOOT/IMGS/
iftitle [if exist /BOOT/IMGS/NTBOOT.iso] [10] 搜索并启动硬盘上的系统
map --mem ()/BOOT/IMGS/NTBOOT.iso (0xCD)
map --hook
map --unmap=0x5
map --rehook
chainloader (0xCD)
boot
title [11] 启动第二硬盘（在U盘上是第一硬盘）上的Windows NT/2000/XP/2003\n[11] to start the second hard disk (U disk is the first hard disk) on Windows NT/2000/XP/2003\n简单，未考虑USB-ZIP的情况\nSimple, does not consider the case of the USB-ZIP
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
map --unmap=0x5
map --rehook
chainloader /ntldr
title [12] 启动第二硬盘（在U盘上是第一硬盘）上的Windows Vista/7\n[12] to start the second hard disk (U disk is the first hard disk) on Windows Vista / Windows 7\n简单，未考虑USB-ZIP的情况\nSimple, does not consider the case of the USB-ZIP
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
map --unmap=0x5
map --rehook
chainloader /bootmgr
title [13] 高级功能菜单
configfile /boot/grub/adv.flp
title [14] 进入Grub控制台
commandline
title [15] 重新启动计算机
reboot
title [16] 关闭计算机
halt || halt --no-acpi || halt --no-apm || halt --force-sci

复制代码