无忧启动论坛

标题: imdisk在vista下使用问题 [打印本页]

作者: go2 时间: 2009-8-28 09:55
标题: imdisk在vista下使用问题
一直觉得imdisk很好用，但vista下加载映像及卸载映像都有问题。查了一下官方网站http://www.ltr-data.se/opencode.html#ImDisk
说"ImDisk is a virtual disk driver for WindowsNT/2000/XP/2003/Vista/2008."
方法如下:

Set the ImDisk driver to auto-load at Command Prompt: sc configimdisk start= auto
orset the ImDisk driver to auto-load using GUI: Open Device Manager, View-> Show hidden devices. Under "Non-plug-and-play devices"right-click ImDisk Virtual Disk Driver and select properties.On the "Driver" tab, change start type to Automatic.

现在加载映像是没问题了，但我用卸载映像时却还是显示错误。不知有没解决方法?

作者: fujianabc 时间: 2009-8-28 15:00
貌似要关了UAC才行

作者: go2 时间: 2009-8-28 18:07
就是不想关了UAC啊

看来只能期待作者更新了。

作者: fujianabc 时间: 2009-8-28 19:54
官网上一段：
Special note for both 32-bit and 64-bit versions of Windows Vista, Windows Server 2008 and Windows 7
On Vista and Server 2008 you need to either turn off UAC, User Access Control, or setup the driver to auto-load on system startup..

Set the ImDisk driver to auto-load at Command Prompt: sc config imdisk start= auto
or set the ImDisk driver to auto-load using GUI: Open Device Manager, View -> Show hidden devices. Under "Non-plug-and-play devices" right-click ImDisk Virtual Disk Driver and select properties. On the "Driver" tab, change start type to Automatic.

Using either solution it should work after next reboot.

要么关uac，要么把驱动加载类型设为启动时加载

作者: go2 时间: 2009-8-28 20:14
已设为系统启动是自动启动imdisk，现在是加载映像没问题，而卸载出问题

作者: go2 时间: 2009-8-28 20:17
标题: 回复 #5 zhxy9804 的帖子
回版主：系统为vista，可能兼容imdisk不好

欢迎光临无忧启动论坛 (http://bbs.wuyou.net./)