无忧启动论坛

标题: pe_Snapshot自动还原 [打印本页]

作者: wab325 时间: 2009-1-2 13:58
标题: pe_Snapshot自动还原
潜水多年了，发一套“pe_Snapshot自动还原”，可热备份系统，不改变mbr，速度飞快！
2009-1-9 修改直接在xp下备份，备份于d:\ghost.. 文件夹设置为不访问和删除。实现全自动备份还原，备份文件安全得到保证。

下载：
http://www.brsbox.com/wab7

和大家一起研究.

附：Snapshot1.38 供大家学习。

[ 本帖最后由 wab325 于 2009-1-9 16:08 编辑 ]

作者: lvyanan 时间: 2009-1-2 14:27
支持一下，不过Snapshot的稳定性还有待于解决。

作者: wab325 时间: 2009-1-2 15:53
多谢了，Snapshot1.38非常稳定。

作者: lvyanan 时间: 2009-1-2 16:34

原帖由 wab325 于 2009-1-2 15:53 发表
多谢了，Snapshot1.38非常稳定。

我用Snapshot1.39，应该更好一些吧？

作者: wab325 时间: 2009-1-2 20:38
lvyanan 有没有可注册的Snapshot1.39，发来wab7@qq.com学习学习看看有什么不同？

作者: lvyanan 时间: 2009-1-2 22:00

原帖由 wab325 于 2009-1-2 20:38 发表
lvyanan 有没有可注册的Snapshot1.39，发来wab7@qq.com学习学习看看有什么不同？

软件已发出，请查收。

作者: barton 时间: 2009-1-2 22:27
snapshot有人真正用于实际备份恢复应用麽？

总感觉这个用起来不踏实

[ 本帖最后由 barton 于 2009-1-2 22:29 编辑 ]

作者: kzr588 时间: 2009-1-2 22:36
习惯了用GHOST，还是第一次听说这个软件，试试

作者: lianjiang 时间: 2009-1-2 23:30
习惯了ghost，感觉还是ghost用着踏实，放心，呵呵。

作者: wab325 时间: 2009-1-3 08:59
多谢lvyanan snapshot这个软件非常实用

作者: wab325 时间: 2009-1-3 09:05
多谢lvyanan 软件已收到，很好用，能否请教您一个问题，我想在pe环境下设计一下批理，是搜索哪个是最后一个分区，并赋于一个变量不知该怎样写？

作者: lvyanan 时间: 2009-1-3 10:01

原帖由 wab325 于 2009-1-3 09:05 发表
多谢lvyanan 软件已收到，很好用，能否请教您一个问题，我想在pe环境下设计一下批理，是搜索哪个是最后一个分区，并赋于一个变量不知该怎样写？

批处理方面我不是高手，我的批处理都是Wang6610写的，本论坛有很多批处理高手，找他们帮忙解决吧！

作者: wab325 时间: 2009-1-3 14:58
多谢lvyanan 。。。。。。。。。。。。。。。。

作者: llrrqq 时间: 2009-1-3 18:54
下来看看，谢谢楼主！

作者: wab325 时间: 2009-1-3 20:46
客气了。。。。。。。。。。。。。。。。

作者: liyuepin 时间: 2009-1-4 11:03
这样的备份，还真的没有试过！！多谢分享！！

作者: 23070205 时间: 2009-2-3 22:26
呵呵，用过这个软件，压缩还不错

作者: 天风 时间: 2009-2-5 11:49
自动恢复本来就可以在DOS下运行，为何要用PE多此一举呢？

作者: 天风 时间: 2009-2-5 11:55
SNAPSHOT RESTORE HD1 auto W:\C-DRIVE.SNA -Y -V

show information about the hard disk's partition structure
snapshot.exe show [HDx]

                           [HDx]: number of hard disk, HD1 is the first hard disk

A:>SNAPSHOT SHOW HD1

  SNAPSHOT for DOS V1.21 [Feb 27 2003] Copyright (c) tom ehlert

1 hard disk(s) detected

disk 1 - 1022 cylinders, 255 heads, 63 sectors, 512 byte
         total physical size 29314 MB

Primary partitions       start -    end    : start, size
1:06 FAT16       CHS 0  1  1- 129 254 63  :    0MB,  1020MB
2:05 extended Part. CHS  130  0  1- 2 254 63  :  1019MB,  7037MB
3:07 NTFS inst FS CHS 3  0  1- 249 254 63  :  8056MB, 18003MB
4:0C FAT32 LBA    CHS  250  0  1- 663 254 63  : 26058MB,  3248MB
Logical partitions
1:06 FAT16       CHS  130  1  1- 194 254 63  :  1019MB, 510MB
2:06 FAT16       CHS  195  1  1- 324 254 63  :  1529MB,  1020MB
3:06 FAT16       CHS  439  1  1- 568 254 63  :  3443MB,  1020MB
4:07 NTFS inst FS CHS  569  1  1-1014 254 63  :  4463MB,  3499MB
5:07 NTFS inst FS CHS 1015  1  1-1015 254 63  :  7961MB,    8MB
6:04 FAT16 < 32MB CHS 1016  1  1-1019 254 63  :  7969MB, 32MB
highest used sector on disk 60018840 (29307 MB)

show information about the Image file
snapshot.exe show imagefile

                           imagefile: path and name of the image file

This shows information about the saved volume as it was stored at backup time. Additionally, the partition structure of the original disk is shown.

A:>snapshot show  x:\c-drive.sna

Information about the saved volume from  <x:\c-drive.sna>

  Computer 'TP', drive C:, Label 'C-TP    ', Filesystem FAT (06)
  Hard disk 1 Primary Partition 1- size 2.097.393.664 =1999MB
  total size 1999 MB - 420 MB free - 32768 Bytes per cluster

disk 1 - 1222 cylinders, 255 heads, 63 sectors, 512 byte
         total physical size 9585 MB

Primary partitions       start -    end    : start, size
1:06 FAT16       CHS 0  1  1- 254 254 63  :    0MB,  2001MB
2:0F extended Part  CHS  255  0  1-1023 254 63  :  2000MB,  7586MB
Logical partitions
1:07 NTFS inst FS CHS  255  1  1- 514 254 63  :  2000MB,  2040MB
2:06 FAT16       CHS  515  1  1- 641 254 63  :  4039MB, 997MB
3:07 NTFS inst FS CHS  642  1  1-1023 254 63  :  5036MB,  2997MB
4:07 NTFS inst FS CHS 1023  1  1-1023 254 63  :  8032MB,  1554MB
highest used sector on disk 19631430 (9586 MB)

restore the partition structure
This is required, if your disk is new (not partitioned), or partitioned differently.
Snapshot will restore the exact partitioning of the original disk.

The necessary information is available in each Snapshot image file.

If for some reason you want to partition the disk in a different way, you have to use FDISK or similar tools.
Note: for this to work it is necessary, that the new disk is at least as large as the partitioned area on the original disk;  Snapshot will not modify the partition information in any way.

A:>snapshot restore [HDx] partitionstructure imagefile

                              [HDx]:  Number of hard disk, starting with HD1

                              [imagefile]: Path and name of  Image file

restore the partition data
The real restore action. This will overwrite all data on this partition and replace it with the original data. After that, the partition is identical to the original state.

snapshot.exe restore [HDx] {auto/primary#/logical#} imagefile

                              [HDx]:  Number of hard disk

                              {auto/primary#/logical#}: automatically select the destination partition,

                                                                        or force a primary or logical partition to be restored

                              [imagefile]: Path and name of image file

AUTO - PRIMARY1 - LOGICAL5

Snapshot knows which partition is contained in the image file; option 'AUTO' will use this partition as the destination.
Should you want to restore a different partition, you may select this by PRIMARY1 or LOGICAL2. Please use the SHOW command first to verify what partition you want to restore.

option  -V  ( Verify)

this will cause a verification run after the restore is completed, to verify that all data are readable and correct.
You may abort the verification at any time by pressing Ctrl-C.

Parameter -Y (Yes)

-Y  (YES) will skip the 'are you really sure' question.

the command to automatically restore the C-drive from network drive W: should look similar to:

A:\>snapshot.exe restore HD1 auto W:\c.drive.sna -Y -V

test image file for internal consistency
A:>snapshot test X:C-DRIVE.SNA

this reads the complete image file, and verifies readability and consistency.
This is useful, if you want to make sure%2

作者: 徐德平 时间: 2023-8-9 07:18
Snapshot一键自动还原一键自动备份谁有以前有的找不到了有备份会自动识别还原的就是一运行程序就备份或还原谁有发一个

作者: JaKTo 时间: 2023-8-11 15:12
感谢楼主分享，谢谢！

作者: l13063 时间: 2023-8-11 15:52
提示: 作者被禁止或删除内容自动屏蔽

欢迎光临无忧启动论坛 (http://bbs.wuyou.net./)